ผลิตภัณฑ์ของเรา
คัปปลิ้งขับโรงสีถ่านหินโบลเวอร์สแตนเลสประหยัดพลังงาน
Efficient Energy-Saving Coupling Driving Coal Mill Stainless Steel Blower Introduction Of Centrifugal Fan The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. The performance of the fan is expressed by parameters
การปล่อยอากาศที่เป็นอันตราย โบลเวอร์สแตนเลส สารป้องกันการสึกกร่อนปริมาณสูง
Hot Sale High Volume Anticorrosion Harmful Air Emissions Stainless Steel Blower Introduction Of Centrifugal Fan The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft
โบลเวอร์ขนถ่ายวัสดุสแตนเลสป้องกันการระเบิดที่อุณหภูมิสูง
Stainless Steel High Temperature Explosion Proofing Material Handling Blower Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data
พัดลมโบลเวอร์สำหรับขนถ่ายวัสดุย้อนกลับ แรงดันปานกลาง Antifraying
Medium Pressure Backward Antifraying Material Handling Blower Fan Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The impeller is subjected to a high standard of dynamic balancing adjusting to ensure stable operation of the fan. Test assembly after production is completed to ensure that there is no
HG785 โลหะผสมเหล็กซีเมนต์พัดลมแรงเหวี่ยงพัดลมดูดคู่
HG785 Alloyed Steel Double Suction Ventilation Cement Centrifugal Fan Introduction 1. It can output high out gas pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered. 2. Compact shape, saving space. 3. In the use of common base, the installation is very simple and requires little support from a professional technician. 4. Made of high quality carbon steel, Stainless steel or
V-Belt Driven Q345 พัดลมระบายอากาศซีเมนต์โค้งย้อนกลับสวมทน
V-Belt Driven Q345 Backward Curved Wear Resistant Cement Blower Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. It can be selected if the intake conditions are equivalent and the performance is suitable. It can be used to transport normal temperature
พัดลมระบายอากาศแบบแรงเหวี่ยงเหล็กกล้าคาร์บอนซีเมนต์แรงดันปานกลาง Antiwear
Carbon Steel Medium Pressure Antiwear Cement Centrifugal Blower Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. The fan is equipped with temperature and vibration sensors, which can easily install the fan operation monitoring device. Made of high quality carbon steel,
พัดลมระบายอากาศแบบแรงเหวี่ยงสแตนเลสแบบแรงเหวี่ยงแรงดันสูง
High Pressure Stainless Steel Ventilate Dust Collector Centrifugal Fan Detail introduction The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. This series of fans is a new type of high efficiency industrial fan in the field of small flow and medium pressure. For dust-containing gas, we can meet
พัดลมดูดฝุ่นชีวมวลหม้อไอน้ำ Coupling ขับไปข้างหน้า
Single Suction Coupling Driving Forward Biomass Boiler Dust Collector Fan Detail introduction This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly designed by the national fan industry and organized by the national wind power industry and the
พัดลมแบบแรงเหวี่ยงเก็บฝุ่นโลหะผสมเหล็กอายุการใช้งานยาวนานป้องกันการระเบิด
Alloy Steel Long Lifetime Explosionproof Dust Collector Centrifugal Fan Detail introduction The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians. The motor shaft is elastically connected with the
Kilns Cooling Dust Collector Fan High Air Flow Energy Efficiency
High Air Flow Energy Efficiency Kilns Cooling Dust Collector Fan Detail introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering
AC Motor Industrial Boiler อากาศหลักพัดลมก๊าซไอเสียอุณหภูมิสูง
AC Motor High Temperature Industrial Boiler Primary Air Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
พัดลมก๊าซหุงต้มแบบโค้งย้อนกลับสำหรับงานอุตสาหกรรมหนักสำหรับเครื่องเผาผนึก
Heavy Duty Industrial Backward Curved Sintering Machine Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
ประสิทธิภาพการใช้พลังงานในอุตสาหกรรมมะนาวโรตารี่เตาเผาไอเสียพัดลมระเบิด
Industrial Energy Efficiency Anti-Explosion Lime Rotary Kiln Flue Gas Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media
พัดลมดูดฝุ่นแบบดูดฝุ่นแบบประหยัดพลังงานอายุการใช้งานยาวนาน
Long Life Energy Efficiency Single Inlet Dust Collector Fan Detail introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Customized design according to
AC Motor Antifraying Exhaust พัดลมระบายอากาศซีเมนต์ 4486 ~ 8971m3 / h
AC Motor AC Motor Antifraying Exhaust Cement Blower Fan Introduction The 7-08. series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Technical data series
Q235 Single Inlet Long Lifetime Blower ขนถ่ายวัสดุสำหรับการอบแห้ง
Q235 Single Inlet Long Lifetime Drying Material Handling Blower Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty
10635～12427Pa เครื่องเป่าลมแรงเหวี่ยงแรงดันสูง Forward Materials Dry
High Pressure Forward Materials Drying Stainless Steel Blower Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in the medium
